Mesa, Arizona

BPC100
Service Request

You've already been through troubleshooting with us and the next step is sending the controller in. This form records the details we need to open an inspection — serial number, the error codes the unit is showing, and what you've seen.

  1. 01
    Submit this form
    Serial, error codes, and the full story of the fault.
  2. 02
    Get your order number
    Service Order Number and return information, by email. Don't ship before this.
  3. 03
    Ship the controller
    Order number written on the outside of the box.
  4. 04
    Evaluation & findings
    About 5 business days. We call with what we found before any work is done.

Contact & return shipping

Where the unit comes back

Use the same name as your original order.

Shipping instructions are sent here.

We call to discuss findings before any charge.

Return shipping address*

This is exactly where your controller is sent back. We ship UPS, FedEx and DHL, so it must be a full street address — carriers can't deliver to a PO box.

Your controller

BPC100 pump controller

Engraved in the bottom left corner of the face the wiring enters, directly under the ID-BPC100 marking — see the photo.

Stand the controller so the terminal block faces you. The serial is the number that follows the word Serial, under the ID-BPC100 marking in the bottom left corner.
Front face of an ID BPC100 controller. The serial number is engraved in the bottom left corner, directly below the ID-BPC100 marking.
On this controller the serial is 0316. It sits on the same face as the numbered terminals, in the bottom left corner.
Are you sending the pump in as well?*

Fault details

The more specific, the faster we find it
LED error codes present*

Tick every code the controller is showing or has stored. The CAN status number is shown beside each one if you have it logged. Error codes in the BPC100 guide

The dots on the right are the four red LEDs on the control panel, left to right — filled means lit.

Power supply
Pump and controller
If you can't tell

Which of the four red LEDs light up, the flash pattern, whether the green LED stays on, and whether the code returns after a power cycle.

As much detail as you can give: when it started, what the car was doing, whether it's repeatable, and what you've already tried with us. If you have CAN logs, say so — we'll ask for them.

We'll email your Service Order Number and return information.